Eurol Brake Fluid DOT 4 is a high-quality medium specifically developed for hydraulic brake systems of cars, trucks, mopeds, scooters, forklifts, motorcycles, etc., in both drum and disc brakes (with and without ABS/ASR).

 

Eurol Brake Fluid DOT 4 offers maximum protection against rust and optimal acceptance and transfer of heat. It does not affect seals, metals, or alloys. The lubricating ability of these brake fluids minimizes wear. Eurol Brake Fluid DOT 4 is stable and does not cause deposits. Due to its low viscosity at low temperatures, it performs excellently in winter conditions.

 

Eurol Brake Fluid DOT 4 has a high 'wet boiling point,' preventing vapor formation during intensive braking. This significantly increases the safety and reliability of the brake system. However, it is of utmost importance to timely replace or check the brake fluid; every brake fluid absorbs water, which over time leads to a loss of quality.

 

Eurol Brake Fluid DOT 4 must not be used in brake systems with mineral-based fluid (LHM, usually green-colored) or silicone brake fluid (purple-colored, usually indicated with DOT 5).

 

"Note: Brake fluid is incompatible with, among other things, automotive paints; in case of spillage, the brake fluid must be immediately wiped off with water. Store in a closed container and prevent mixing with water or oil products. "